The force of the motor is relatively large. If you want to use it for wooden gates, please install the support plate in advance to prevent damage to your gate.Compatible with solar system (not included in the package). The 2pcs remote controls(transmitters) in the package have been learned in factory, you needn't learn it again. Please note that after you install the gate opener, you need to do the travel setting first, then you can control the gate opener with remote control(transmitter); Before travel setting, the gates should be opened fully.
Control box with control board. Please note there is an empty small box in the package, it is just for holding. Recording of up remote control. Inside control board and transformer.
The control board is 24VDC, and there is a transformer in the box to transform 24V to 110V, so you can connect the power wire to 110V power supply directly. Release or lock the gate opener with the release bar. There is a parameter label attached to the main engine. The factory setting is double gate mode, you can set single gate mode (MOT2)by yourself.There is no auto-closing time set in the factory, you can set it by yourself. When opening the door, MOT1 start is delayed by a certain time(The factory setting is 2s) than MOT2. When closing the door, MOT2 start is delayed by a certain time(The factory setting is 5s) than MOT1.
This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Garage Doors & Openers\Opener Systems". The seller is "automatic-gate-operator-hardware" and is located in this country: US. This item can be shipped to United States.