GT1100DC-J Fast Automatic Sliding Gate Opener Kit Door Operator for 1100lb&40ft

  
After you installed the gate opener, you need to do the close limit position setting first, then do the open limit position setting. DC24V 150W motor with low voice, it can be connected to the solar panel, compatible with the solar system. With a low-power control board?

Can be used for a longer time in the event of a power failure. Origin sensor and Electronic limit switch? When the power supply is accidentally failed, the gate opener will restore to its setting travel through the origin sensor kit. Easy to set and program. Automatic close time setting, auto-reserve when meeting obstacles setting.

You can set the gate opener running speed according to your needs, the speed is 52-59 ft/min. Auto-reverse When Meeting Obstacles Setting.

Due to the usage for this product is different for users from different regions, the control board for this product offers different working modes for users to choose. Due to the different installation environment and gate installation status, users can adjust the acceleration of starting and deceleration of buffering of the gate opener to their necessary.

When the gate opener receives the opening/closing signal, it'll start to work after a certain time (the settled delay time). Origin marker (magnet) and Origin sensor.

The origin marker should be mounted to the gate by the installer when installing the gate opener. The origin sensor was installed inside the machine in the factory. During gate opening and closing, the gate opener will calibrate the opening and closing limit position through the origin sensor kit to realize a precise travel positioning. Do not move or remove the origin marker after the opening and closing limit position are settled. Recording of up remote controls: 100.

Single button mode: One button on the remote control can control the gate opener open-stop-close. Pedestrian Mode function: Press the pedestrian mode button on the remote control (the forth button) when the gate is closed, it will open for 3.28 ft then stop which is for pedestrian traffic. Remote Control Intelligent Learning: Enables user to pair the remote controls to the control board without dismantling the machine. Gate moving speed: 52-59 ft/min.

Maximum weight of gate: 1100 lb. Remote control distance: = 100 ft. Remote control mode: Single button mode.

Limit switch: Electronic limit switch. In order to make sure that the first installation of this product is in good condition, users can test the opening/closing operation under manual control mode. Under low power circumstance, users may have to unlock the machine first, after which the gate can be manually operated. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Garage Doors & Openers\Opener Systems".

The seller is "automatic-gate-operator-hardware" and is located in this country: US. This item can be shipped to United States.

• Type: Gate Opener
• Model: GT1100DC-J
• Gate moving speed: 52-59 ft/min
• Power Source: Electric/Solar Powered
• Custom Bundle: Yes
• Items Included: Remote Control, Safety Sensor
• Maximum Gate Size: 40 ft
• Brand: G.

  Master

• Manufacturer Warranty: 1 Year
• Maximum Gate Weight: 1100 lbs
• Voltage: 110V
• Motor Power: 150W DC
• Item Weight: 36.9 pounds