You can set the gate to close in 12, 24, or 36 seconds after it opens. You can add up to 20 extra remotes to control this system. It uses an RF hopping code to prevent replay attacks, which makes it impossible for eavesdroppers to record the transmission to replay it later to open the gate.
The gate must be on a level ground and cannot operate on a slope. In case of a power outage or any emergency, you may also use a manual release key to open the gate. Our sliding gate opener uses an AC motor. It has a power supply of 200W. The high capacity and big torque allow up to 1400lbs bearing.
The remote operates simply and prevents conflicting orders by using any of its buttons to toggle through the actions OPEN, STOP, CLOSE, and STOP. One gate opener can be controlled by up to 20 remotes.There is also a pedestrian mode that the gate will open about 1-5ft for people to pass through. Maximum Gate Length: 40ft (includes 20ft of chain).
Power Supply: 110V AC, 60Hz. Gate Move Speed: 43ft/min (8.5/second). Remote Control Range: 100ft (Frequency: 433.92 MHz). Limit Switch: Magnetic Limit Switch.
Max # of Remotes 20. Duty Cycle: S2, 15 Minutes. 1Box of accessories (2x 3M chains and a screw kit).