Gate Opener Kit

Slide Gate Opener Ram 50 Residential Sliding Electric Chain Operator Kit 1

Slide Gate Opener Ram 50 Residential Sliding Electric Chain Operator Kit 1
Slide Gate Opener Ram 50 Residential Sliding Electric Chain Operator Kit 1
Slide Gate Opener Ram 50 Residential Sliding Electric Chain Operator Kit 1
Slide Gate Opener Ram 50 Residential Sliding Electric Chain Operator Kit 1
Slide Gate Opener Ram 50 Residential Sliding Electric Chain Operator Kit 1

Slide Gate Opener Ram 50 Residential Sliding Electric Chain Operator Kit 1    Slide Gate Opener Ram 50 Residential Sliding Electric Chain Operator Kit 1
Ram 50 GB gate Openers kit 1 Include. Ram 50 GB 1/2 HP gate operator. Two Mini-Remote Control model 433 MHz 2-Button. 10 to 160 degrees F.

H:16 1/2 L:11" W:17". Left / Right hand Switch Adjustment. 3-Wire Master/Slave Synchronization Cable Plug-in Loop Detector (ILD-24s)Capability Relay Connection Service Push Buttons.

One pass, ERD Sensitivity Adjustments. While the gate is opening, after a safety device is detected and cleared, the gate will immediately close whether or not the limit has been reached. When the gate is closing, if a safety is etected the gate will stop but not reverse it self. Automatically closes the gate after all safety devices are clear.

RS485 3-wire cable allows two operators to run together in a master/slave configuration. Plug-in Loop Detector (ILD-24s) Capability. Eliminates wire mess and allows for a clean, easy, well organized installation.

Adds a 3 second delay before the gate moves in any direction. During this 3 second delay a siren, buzzer or light can be added to activate. Allows an alarm or light (not included) to activate while the gate is in motion. This automatically closes the gate after power is lost and regained whether or not the gate is on a limit. Adds a 1 second delay on either the open or close cycle.

Relay Connection & Service Push Buttons. Relay outputs that will light a lamp or sound a buzzer/alarm when the gate is not closed, moving or before the gate moves. Service pushbuttons allow the technician to have complete control of the gate when adjusting the operator. Gives the user complete control of the gate. The gate can be opened with the 1st command, stopped with the 2nd command and closed with the 3rd command.

Automatic Timer One pass, ERD sensitivity adjustments Left/Right hand switch adjustment Plug-in loop detector (ILD-24s) capability 3-Wire Master/Slave synchronization cable Pre-warn & constant warn Secure close Open & close delay Relay connection & service push buttons Radio cycle. The item "Slide Gate Opener Ram 50 Residential Sliding Electric Chain Operator Kit 1" is in sale since Thursday, August 25, 2016. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Garage Doors & Openers\Opener Systems". The seller is "gateopeners-and-more" and is located in Hollywood, Florida.

This item can be shipped to United States.

  • Model: Ram 50 GB gate Openers
  • Power Source: Electric
  • Type: Gate Opener
  • Maximum Travel / Weight: 20 ft/ 700 lbs
  • Motor:: 30 Cycles/ Hr
  • MPN: Ram 50 GB gate Openers
  • Operating Temperature:: -10 to 160 degrees F
  • Overall Dimensions:: H:16 1/2 L:11" W:17"
  • Brand: Ramset
  • Application: Commercial


Slide Gate Opener Ram 50 Residential Sliding Electric Chain Operator Kit 1    Slide Gate Opener Ram 50 Residential Sliding Electric Chain Operator Kit 1